Wall stickers and wall decals for a perfect home decor : more than 10 000 wall stickers!
Espanol English Français Italian Dutch German
My account
My cart
Your cart is empty.
0 product(s) | 0.00€
pixel_trans
pixel_trans

Customer Service
support@ambiance-sticker.com

+33 9 80 80 05 05

Mon to Fri 9am to 6pm

 

» User Manual
User Manual

User guide 

 

Sticker with transfer tape
(They are the monochromatic stickers with a choice of size and/or colour)

 

 

Clean the surface you want to apply your sticker to. The surface must be smooth, clean, dry and free from dust.  If the surface has been recently painted, wait at least two weeks after painting before applying.

Plan how you would like your design to look—it does not have to match the picture—and locate the appropriate pieces on the sheets.
If needed, Cut the sheets so that the separate pieces can be handled individually.

Put the sticker in the desired position on the wall and hold it in place at the top with masking tape.
Apply masking tape across the center of the sticker.

 

 

Remove the top masking tape and peel off the clear transfer film toward yourself, while making sure that all the stickers stick to the clear transfer film. If it does not, re-apply the film, and smooth with a credit card, squeegee or coin.

Cut off the white backing paper. Make sure that the transfer film does not touch the rest of the sticker.

 

 

 

 

 

 

Apply the transfer tape with sticker to the top part of the wall, starting from the part near the masking tape and working towards the edges. Using a credit card, squeegee or coin, firmly rub the sticker to the wall and remove air bubbles. If air bubbles persist, prick the sticker with a needle.

 

Remove the masking tape at the center of the sticker and apply the bottom half of the sticker as you did in step 6.

 

 

 

 

 

 

Delicately peel off the transfer tape, starting from the top and working downwards.

 

 

 

 

 

 

 



Sticker without transfer tape
(They are the stickers without choice of size and colour)

Clean the surface you want to apply your sticker to. The surface must be smooth, clean, dry and free from dust.  If the surface has been recently painted, wait at least two weeks after painting before applying.

 

 

Plan how you would like your design to look like - it does not have to match the picture - and locate the appropriate pieces on the sheets.

 

 

 

 

Peel off the sticker from the backing paper and stick on the desired spot. Remove air bubbles by lightly pricking the sticker with a needle.